TiLite 2GX Ultralight Titanium Wheelchair
The TiLite 2GX Titanium folding wheelchair with its state-of-the art design offers great performance. The combination of the TiLite’s Tru-Fit component system and signature Bullet caster housing with a unique curved axle plate, gives the 2GX great versatility and durability. The 2GX offers a smooth ride and performance.
TiLite 2GX Ultralight Titanium Wheelchair Features
- Titanium Folding frame
- Fixed and Swing-away frame options
- Multiple Upholstery colors
- Spinergy Wheels available
TiLite 2GX Engineered To Empower
The 2GX combines the advantages of a folding frame with the strength of titanium and the optimization of full adjustability. Engineered around you, the 2GX is designed to empower – no matter where you choose to roll.
TiLite 2GX Folding Frame Design
TiLite’s “Easy-Fold” rigid folding mechanism features an over-center mounted cross brace that improves rigidity and ride. This keeps the bottom pivot point in line with the frame, allowing the chair to fold as narrowly as possible while promoting performance and durability.
TiLite 2GX The Titanium Advantage
Titanium absorbs vibration, won’t break, and has the highest strength-to-weight ratio of any metal on Earth. That is why TiLite builds our highest performing wheelchairs from seamless, aerospace-grade titanium. If you want strength, durability, and a smooth roll, you want a titanium ride.
TiLite 2GX Full Adjustability
The Tru-Fit system opens up the world of adjustability by incorporating an infinite adjustment mechanism. The Tru-Fit system allows you to fine tune the fit of your chair because you are not limited to a series of pre-set holes.
TiLite has been around for close to three decades. We just didn’t make wheelchairs in the early years. Back then we made titanium bike frames, golf shafts, motorcycle frames, and a huge variety of custom, one-off titanium projects. We also made titanium wheelchair parts for a few wheelchair manufacturers. Then, in the late 1990’s, we began to wonder whether it would make sense to apply our knowledge of customization to wheelchairs. In other words, would a wheelchair frame that is fabricated to fit a single person make it perform better for that person? We knew it would fit better and be more comfortable, but would this ergonomic improvement make it easier to push? It turns out that it would. We now call this process TiFit.
16 lbs (based upon 16″ x 16″ chair with no wheel locks or rear wheels)
Swing-Away or Fixed
Satin or Polished
12″ – 20″
12″ – 20″
|Front Seat Height:||
15″ – 22″
|Rear Seat Height:||
13″ – 20.5″
3″, 4″, 5″ , 6″ , 8″
|Rear Wheel Sizes:||
22″, 24″ , 25″ , 26″
|Rear Wheel Type:||
Spinergy Wire, Spinergy SPOX, Spinergy LX, TiLite, Skyway Mags
0º, 2º, 4º, 6º, 8º
|Front Frame Angle:||
70º, 80º, 85º or 90º
|Center of Gravity:||
1″ – 6″
Are all products returnable?
No. There are no returns on the following categories of products: hospital beds, custom wheelchairs, lift chairs, wound care, incontinence items, masks, braces, stockings, shoes, bath safety products, and all custom built/ordered items including orthopedic supports.
How much are the return restocking fees?
A 25% restocking fees applies to all returns.
What's your return policy?
We want you to be completely satisfied with your purchase. You may return your purchase within 30 days of receipt - see below for exceptions.
- To qualify for a return, please note the following:
- Product must be unused, clean and not damaged
- Original packaging and materials intact (i.e. instructions, warranty information)
- Return shipping costs are the responsibility of the customer
How do I contact Daily Care, Inc?
Daily Care, Inc.
19330 Ventura Blvd
Tarzana, CA 91356
Our Business Hours
Mon-Fri: 9 am-6 pm, Sat: 9 am - 4 pm Pacific Time
Toll Free: 844-819-4110